Bitaxe Gamma v601 – Loud & Proud

Bitaxe Gamma v601 Loud & Proud - the powerful solo miner

MADE IN DEZENTRALSCHWEIZ! 

We now produce our own Bitaxe Gamma v601 - fully in the spirit of the open-source idea.

The Bitaxe GAMMA v601 is your perfect entry into the world of decentralised Bitcoin mining. Affordable, efficient and ready to use in just a few minutes. This version is the simpler and more affordable variant of the Bitaxe Gamma and includes a 31W power supply .

The Loud & Proud Edition is ideal if a slightly louder fan is no problem for you. The powerful standard fan with up to 7500 revolutions per minute provides very good cooling for your solo miner - at the cost of a slightly higher noise level.
Perfect if your solo miner is located in a hobby room, laundry room or separate room, where a constant hum does not bother you.

Together, let's further decentralise the hashrate – with your own open and transparent Bitcoin miner.

1. Performance & efficiency

• Hash rate: up to 1.3 TH/s (standard setup approx. 1.1 TH/s)
• ASIC chip: BM1370 - the same chip as in the Antminer S21 Pro
• Power consumption: only up to 18 W
• Excellently suited as:
  • an affordable entry into mining
  • an additional „lottery ticket“ for experienced miners
  • a learning and tinkering platform in the Bitcoin and hardware space

2. Connectivity & control

The Bitaxe GAMMA v601 is fully Wi-Fi capable and can be conveniently configured via the web interface.

• Wi-Fi module: ESP32-S3-WROOM-1 integrated
• Connection via web interface - no special knowledge required
• Easy remote monitoring and control over your local network

3. Effortless setup - ready in about 2 minutes

With the included YouTube guide your miner is ready to go in just a few minutes:

1. Set up Wi-Fi

   • Connect to the miner's Wi-Fi (SSID/info on the display).
   • Open the settings and connect the Bitaxe to your home Wi-Fi.

2. Enter Bitcoin wallet

   • Enter a valid Bitcoin wallet address to which the mining rewards should be sent.

3. Restart & mining

   • After a restart, the Bitaxe automatically starts mining.
   • No additional software needed.

YouTube guide: Link

4. Hardware & cooling

• Display: 0.91″ SSD1306 OLED I2C for real-time monitoring of hashrate, temperature & status
• Cooling:
  • 40×40 mm Bitchin’ heatsink
  • Standard fan 7500 rpm
• Power supply:
  • Power supply (30 W, 5V/6A) included
  • Total cable length approx. 1.5 m

5. Open source & community

The Bitaxe GAMMA v601 is based on an open-source design:

• Schematics, firmware & design are openly documented
• Ideal for makers, developers and Bitcoin enthusiastswho want to:
  • test their own modifications
  • develop new features
  • contribute to the development of the Bitaxe community
  • Visit the Community

The active Bitaxe community ensures the miner is continuously improved and documented.

6. Important notes & liability

The Performance and efficiency of the device depend significantly on the clock frequency of the ASIC chip and the cooling .

• Overclocking without sufficient cooling can damage the device.
• No warranty is provided for damage caused by overclocking.
• Likewise, no warranty is given for future firmware versions beyond the delivered state.

Please make sure your Bitaxe is always sufficiently cooled .

7. Who is the Bitaxe GAMMA v601 for?

• For Beginnerwho want to try mining on a small budget
• For Bitcoin maximalistswho want to add to their own node and mining infrastructure
• For Tinkerers & techieswho love open-source hardware
• For everyone who wants an additional lottery ticket in the mining ecosystem and, at the same time, want to support the decentralisation of the hashrate .

Whether you're new to mining or an old hand - the Bitaxe GAMMA v601 offers everything you need to get started right away.
Included in delivery: Miner and power supply. The stand for Bitaxe Gamma is available separately.